| CONSTRUCTION | |
Printed or laminated layer
sealing layer |
JANUR 301 is a one side treated and metallized, the other side heat sealable Blown Polyethylene film. |
| FEATURES |
| - Excellent mechanical and optical properties. - One side aluminium coated by vacuum metallization with optimum adhesion. - Excellent moisture and light barrier properties. - Superior resistance to tear and perforation. - Produced from FDA approved resins. |
| PROPERTIES | |||
| Parameters | Unit | Typical Value | Test Method |
| Thickness | Micron | 50 | - |
| Density | g/cm³ | 0.94 | - |
| Gloss | % | - | ASTM D 2457 |
| Coefficient of Friction (COF) | non-treated to non treated side | < 0,50 | ASTM D 1894 |
| Optical Density | - | 2.5 | Tobias |
| Tensile Strength | N/mm² | MD 46 ±2 TD 35 ±3 |
ASTM D 882 |
| Elongation Break | % | MD 700±100 |
ASTM D 882 |
| Heat Seal Range | °C | 115 -130 | - |
| Surface Tension | dynes/cm | > 38 | ASTM D 2578 |
| Moisture Barrier (WVTR) | g/m²/day | < 1.0 | ASTM E 96 (37,8° C, 90% RH) |
| Gas Barrier (O2 TR) | ml/m²/24 hrs | 180 | ASTM D1434 |
All of the technical information presented above is obtained from an independent laboratory report that is constructed based on our film sample. We believe the data to be reliable, however, it is not presented as a guarantee. We recommend the buyers determine the suitability of our film based on their need.
