| CONSTRUCTION | |
Printed or laminated layer
sealing layer |
JANUR 03 is a heat sealable, one side treated, Plastomer base BPE film. Specially designed for application that requires very low heat seal film. Also commonly used for lid-cup application. |
| FEATURES |
| - Excellent mechanical and optical properties. - Good barrier to humidity. - Resistant to tear and perforation. - Good flatness. - Produced from FDA approved resins. |
| PROPERTIES | |||
| Parameters | Unit | Typical Value | Test Method |
| Thickness | Micron | 25 | - |
| Density | g/cm³ | 0.92 | - |
| Gloss | % | 58 ±2 | ASTM D 2457 |
| Haze | % | < 12,0 | ASTM D 1003 |
| Coefficient of Friction (COF) | non-treated to non treated side | < 0,4 | ASTM D 1894 |
| Tensile Strength | N/mm² | MD 42 ±5 TD 25 ± 3 |
ASTM D 882 |
| Elongation Break | % | MD 600 ±100 TD 700 ±100 |
ASTM D 882 |
| Heat Seal Range | °C | 100-120 | |
| Surface Tension | dynes/cm | > 38 | ASTM D 2578 |
| Moisture Barrier (WVTR) | g/m²/day | 30 | ASTM E 96, (37,8 deg C, 90% RH) |
| Gas Barrier (O2 TR) | ml/m²/24 hrs | 1870 | ASTM D1434 |
All of the technical information presented above is obtained from an independent laboratory report that is constructed based on our film sample. We believe the data to be reliable, however, it is not presented as a guarantee. We recommend the buyers determine the suitability of our film based on their need.
